Vacuum filter FCL1

Vacuum filter FCL1
Vacuum filter FCL1
  • Stock: In Stock
  • Model: FCL1
  • Weight: 0.25kg
  • Dimensions: 6.00cm x 6.00cm x 10.00cm
  • Model:  FCL1
  • Operating pressure range: : from 0.5 to 5000 absolute mbar
  • Type: Dust removal
  • Capacity: 125 l/m, 7,5m3/h
  • Filtration rating: 7 µm
  • Port, screw: G1/4F
  • Element type: Paper
Ex Tax: 45.82€

Miniature vacuum filter FCL for cleaning the flow from fine dust. Thanks to its reduced dimensions, it can be installed directly on the vacuum line, next to the components (injectors, suction cups, connection fittings, etc.)

The cylindrical body of the FCL series vacuum filter is made of Plexiglass closed by two anodized aluminum flanges held by locking rings. Depending on the filter model, the flanges have an male or female thread. The transparent housing of the vacuum filter allows for better visual control during operation. The filter element is made of specially processed corrugated (to increase its surface) paper with a filtration degree of 7 microns.

To clean or replace the filter element, it is enough to remove one of the two flanges.

Due to the paper filter element, this vacuum filter is not recommended for use in the presence of water or oil vapors, or condensation.

Technical data
Capacity125 l/m
Operating pressure range−100 to 0 kPa
TypeDust removal
Filtration rating7 µm
Port, screwG1/4F

There are no reviews for this product.

Write a review

Please login or register to review