Becker Vacuum Pumps for Vacuum Presses

Becker Oil-Free Rotary Vane Vacuum Pumps

Becker VT vacuum pumps use dry rotary vane technology and operate without oil in the compression chamber. This makes them well suited for vacuum presses and other applications where reliable vacuum generation, straightforward maintenance and clean operation are important.

These pumps can be used with membrane vacuum presses, vacuum bags, veneering and laminating equipment, vacuum clamping equipment and other industrial vacuum applications. Their compact design makes Becker VT pumps suitable both for integration into new equipment and for replacing an existing vacuum pump.

Choosing a Vacuum Pump for a Vacuum Press

The required pump capacity depends on the internal volume of the vacuum press or bag, the desired evacuation time and the expected air leakage during operation. Higher pumping capacity reduces the time required to evacuate a given volume, while smaller pumps can be sufficient for compact presses and vacuum bags.

The electrical supply should also be considered. The Becker VT range available from Brevita includes both single-phase and three-phase vacuum pumps, allowing the pump to be matched to the electrical installation and operating requirements of the equipment.

If you need a complete vacuum unit rather than an individual pump, see our vacuum systems for vacuum presses and bags.

Becker VT Vacuum Pumps from 4 to 40 m³/h

The available Becker VT range covers pumping capacities from 4 to 40 m³/h, allowing the pump to be selected according to the volume of the vacuum press, vacuum bag or other equipment. Compact models are suitable for smaller applications, while higher-capacity pumps provide faster evacuation of larger vacuum volumes.

When replacing an existing pump, check the required pumping capacity, motor voltage, phase configuration and connection arrangement before ordering. The individual product pages provide specifications for each Becker VT model, while this category allows you to compare the available pump capacities and configurations.

Maintenance and Spare Parts for Becker Vacuum Pumps

Dry rotary vane vacuum pumps require periodic inspection of the vanes and filtration components. Service intervals depend on operating hours, working conditions and the amount of dust or contamination entering the vacuum line.

Brevita supplies replacement vanes for Becker vacuum pumps and filters for Becker vacuum pumps for maintenance of Becker VT series pumps. Using appropriate filtration can help protect the pump from dust and particles entering the vacuum line and support reliable operation.

For practical maintenance recommendations, filter inspection, vane replacement and troubleshooting tips, see our Becker vacuum pump maintenance guide.

If you are replacing a vacuum pump in an existing press or selecting a pump for new equipment, contact Brevita with the required capacity, electrical supply and application details. We can help identify a suitable Becker VT model.