Menu

Blog

Information

Account

Get In Touch

Menu

Blog

Information

Account

Get In Touch

0

Vacuum level control system VLCU-3D/10A

Vacuum level control system VLCU-3D/10A
Vacuum level control system VLCU-3D/10A
Vacuum level control system VLCU-3D/10A
Vacuum level control system VLCU-3D/10A
Vacuum level control system VLCU-3D/10A
Vacuum level control system VLCU-3D/10A
Vacuum level control system VLCU-3D/10A
  • Model: VLCU-3D-10A
  • Type:   Three phase
  • Max. Output current:  10A
  • Voltage AC:  400 V
  • Settings range: -1 - 0 bar
  • Сontrol device: Festo SPAN
  • Availability: In Stock
  • Gross Weight: 7.00kg
  • Packaging dimensions: 20.00cm x 20.00cm x 30.00cm
0 reviews • Write a review
544.50€
Ex Tax: 450.00€
Add to Cart
Add to Wish List Compare this Product
Tags: VLCU-3D/10A , Control units , Vacuum press

The VLCU-3D/10A vacuum level control system is designed to control the operation of vacuum pumps with three-phase motors (3Ph 400V, 50Hz), with a maximum output current of 10A. The vacuum pump control system is equipped with motor protection, setting range 6.3-10A.

The vacuum pump control is based on the operation of the pressure sensor Festo SPAN series B11. The vacuum sensor is equipped with a backlit digital screen for easy setup. The vacuum value in the system is controlled and maintained automatically. The vacuum and its value are also displayed on the vacuum gauge.

  • The vacuum level setting range is from -1 to 0 bar.
  • Hysteresis setting range: 0-90%.
  • Choice of measurement units: MPa, kPa, bar, psi.

For the correct operation of the vacuum level control, your vacuum system must be equipped with a receiver with a minimum volume of 5 liters. To connect the control unit to the vacuum system, use a vacuum tube with a diameter of 4 mm. The control unit is equipped with a 3 m long tube with a G1/8 threaded quick coupling.

Factory setting range:

  • Vacuum pump shutdown: -0.85 bar.
  • Vacuum pump activation: -0.65 bar.
  • Protection level IP40.
Technical data
Type of control Automatic (Start/Stop)
Motor phase Three-phase
Supply voltage 400 V AC
Supply frequency 50 Hz
Maximum motor current 10 A
Motor protection adjustment range 6.3–10 A
Vacuum setting range (gauge pressure) −1…0 bar
IP rating IP40
Factory pump stop setting −0.85 bar
Factory pump start setting −0.65 bar
Vacuum tube diameter 4 mm
Minimum required receiver volume 5 L
Control device Festo SPAN B11

There are no reviews for this product.

Write a review

Please login or register to review